8
ENGLISH
DCX NET series User manual
lights up. Of course, if you press again this button, the audio signal will be reactivated.
If you press and hold this button, you can access the channel parameters list.
2)^LED MUTE
As explained in the previous point, when this LED is ON, the audio signal in this Input
channel is deactivated. Vice versa, if the LED is OFF, the respective Input channel is in
MUTE (No audio signal).
3)^CHANNEL SIGNAL METER INDICATORS
These are four LEDs (3 Green and 1 Yellow) those indicate the presence and the level of
the signal at the correspondent processor input channel (-20dB, -10dB, 0dB, +10dB). If
these LEDs light up even in the absence of a signal, there may be some interferences or
some other abnormal operating condition.
4)^CLIP indicator
This LED, when it is ON, indicates that the corresponding channel has an input overload.
Some flashing may be normal but if this LED remain ON for a long time, please reduce
the input signal levels until the LED turn OFF.
4.3. CONTROL PANEL SECTION
1
2
3
4
5
6
7
8
1)^LCD DISPLAY
It shows, by default, the name of the last recalled memory in the second row and the
current processor mode in the first row. Also, it shows all parameters as they are edited,
and all menu selections.
4x8 PROCESSOR
P->20
2)^Rotary ENCODERS
Three velocity sensitive encoders adjust the relevant parameters described in the silk-
screenings below and as shown on the display.
