In most cases, the main output of the decoder/processor will be connected to the
“LINE IN “connection as shown
in the drawing below. Some decoders have a dedicated line level output for subwoofer operation. This output, usually labeled
Subwoofer Out
can be directly connected to the LEFT or RIGHT “Line In” connections on the
. For increased
performance, use an RCA “Y ‘adapter single female dual male to apply the Subwoofer Out
both
and RIGHT
“Line Inputs” on the THP-CXB
NOTE: Some surround sound processors have their own internal crossovers associated with the dedicated
OUTPUT” connection. Combining the
crossover with the crossover in the surround sound processor may result in
low output volume and increased noise. If the surround sound processor is not configured shown in this drawing, use;
Method A-l “Amplifier Wiring For Most Receivers “via the main speaker terminal outputs of your receiver or integrated ampli-
fier.
LINE LEVEL CONNECTIONS WITH
A SURROUND SOUND RECEIVER
Many “5-channel Surround Sound
Receivers” and some hybrid
pre-
amplifiers, may also have a “SUB-
WOOFER OUT” connection. As
noted above, combining this output
with the THP-CXB ‘s crossover may
result in low output volume and
increased noise. Do not attempt to
connect the “SUBWOOFER OUT”
output to the THP-CXB unless you
are certain that is not connected to an
internal crossover.
Line Level
Surround Sound
Processor
Connections
TO
TO
LEFT
SPEAKER
9
