INTERSECTOR LED LIGHT
#ENT3(y)3(x) - SURFACE MOUNT
#PNT3DGBB DECK/ GRILLE BRACKET, BLACK
FUNCTION TABLE 1
WIRE
LIGHT
RED
RED/
WHITE
WHITE
SINGLE
DUAL
+12V
FLASH
FLASH DUAL
+12
CRUISE
STEADY COLOR
2
+12V
+12V
FLASH
STEADY COLOR
2
+12V
NO OP
NO OP
+12V
+12V
LOW PWR
FLASH
FLASH COLOR 1
+12V
+12V
CRUISE
FLASH COLOR 2
FUNCTION TABLE 3
WIRE
LIGHT
RED
RED/
WHITE
WHITE
SINGLE
DUAL
+12V
FLASH
FLASH DUAL
+12V
FLASH LOW
PWR
FLASH DUAL LOW
PWR
+12V
+12V
FLASH LOW
PWR
FLASH DUAL LOW
PWR
+12V
NO OP
NO OP
+12V
+12V
FLASH LOW
PWR
FLASH DUAL LOW
PWR
+12V
+12V
FLASH LOW
PWR
FLASH DUAL LOW
PWR
+12V
+12V
+12V
FLASH LOW
PWR
FLASH DUAL LOW
PWR
FUNCTION TABLES
Changing the function table is only enabled when the LED module is in a flashing mode (disabled in cruise or steady ON functions). The functional operation of the LED module can be changed while apvdc
to the Red wire with the black wire connected to ground. When the light is flashing, momentarily touch the White wire to ground for >4s and <5s (light will go steady high, steady low, off, steady high, steady low)
then release. The function table will now advance to the next table (table 1 to table 2, table 2 to table 3, or table 3 to table 1). Repeat above process until required function table is active.
FUNCTION TABLE 2
WIRE
LIGHT
RED
RED/
WHITE
WHITE
SINGLE
DUAL
+12V
+12V
CRUISE
FLASH DUAL
+12V
STEADY
COLOR 1
STEADY COLOR 2
+12V
+12V
STEADY
COLOR 1
STEADY COLOR 2
+12V
NO OP
NO OP
+12V
FLASH
FLASH COLOR 1
