INTERSECTOR LED LIGHT
#ENT3(y)3(x) - SURFACE MOUNT
#PNT3DGBB DECK/ GRILLE BRACKET, BLACK
OPERATION:
For details on operation see page with ‘Flash
Patterns’ table on page 4.
!
WARNING
This product contains high intensity LED devices. To
prevent eye damage, DO NOT stare into the light
beam at close range.
IMPORTANT:
Supply power through a 3A fuse. For
Flashing mode, refer to function tables 1,2
and 3 on page 3. For slave/Remote Node
functionality such as when connected to
Blueprint, permanently connect the Green
wire to ground. Refer to Remote Node
functionality table on page 5.
Insulate all connections.
SURFACE MOUNT
INSTALLATION:
1. Establish a position on the vehicle on a level
surface. Orient the light output level on the
horizon.
2. Use the gasket provided as a template to
mark locations of wire and mounting
screws
3. Use a 5/8” diameter drill for the wire holes
4. Size pilot holes for mounting screws
appropiately.
5. Fasten light using bezel and mounting
screws. Do not torque mounting screws
beyond 20 in - lbs.
DECK/ GRILLE BRACKET
INSTALLATION:
(PURCHASED SEPARATELY)
1. Slide wire from Bezel through center
access hole in the gasket and bracket.
2. Next, position the Housing over the Bezel
and align the holes with the bracket.
3. Lastly, using the supplied 8-32 x 1”
screws fasten the assembly lightly. Do
not torque mounting screws beyond 20
in - lbs.
4. Establish a position on the vehicle on a level
surface. Orient the light output level on the
horizon.
5. Use the bracket provided as a template to
mark locations of mounting screws.
6. Size pilot holes for mounting screws
appropiately.
7. Fasten light using bezel and mounting
screws. Do not torque mounting screws
beyond 20 in - lbs.
SURFACE MOUNT
DECK/ GRILLE BRACKET MOUNT
BRACKET
GASKET
BEZEL
HOUSING
8/32 x 1” PHIL PAN SCREWS
Please see last page for Technical Specifications
•HIGH CURRENT interconnects must be properly terminated. Poor crimp quality can cause heat
build-up and fire. Follow crimp connector manufacturer instructions.
•DO NOT install this product or route any wires in the Air Bag Deployment Zone. Refer to vehicle
Owner’s Manual for deployment zones.
•Unit may become hot to touch during normal operation.
•Failure to properly install connectors, fuses or wiring may cause vehicle failure or fire.
•Installation must only be performed by trained technician. Installer must determine vehicle wiring
configuration and proper integration of system.
•Use proper wire gauge. All power wires connecting to positive (+) or negative (-) battery terminal
or local chassis ground (-) must be sized to supply at least 125% of max. current and properly fused at
power source.
•Install protective grommets when routing wire through firewall or metal.
WARNING
WIRE HOOK-UP TABLE
WIRE COLOR:
FUNCTION:
RED
Table pg. 3
BLACK
Ground
GREEN**
Sync2 or Remote Node
Function*
WHITE to GROUND
Wire Function
See Table pg. 2
WHITE to POWER
Table pg. 3
RED/WHITE
Table pg. 3
** To sync multiple Intersector or Nforce
lights connect the green wire from each
light together.
*Will NOT work w/ other sync products such
as Ghost, LED3, & 4-wire Intersector.
BLACK
RED
WHITE
GREEN
Sync
RED/WHITE
+Vdc
A FUSE
3
+Vdc
A FUSE
3
+Vdc
A FUSE
3
OPERATIONAL CONNECTIONS:
