SOUNDMASTER UR2050, Manual

Page: 10 / 12

UR2050 operating instruction of English
B, The duration of the alarm is 60 minutes
3.3.5 If CD alarm is selected,
A, CD On
B, The duration of the alarm is 60 minutes
3.3.6 Press any key to terminate the currently active alarm, even key-lock has been switched on .
3.4 Using Radio
3.4.1 Start the radio
•
Press < Power > once to turn on the unit
•
Press < FUNC/User > key to select Radio
•
Press < Power > again to turn off the unit
3.4.2 Select User
•
Press and hold < FUNC/User > for 3 seconds to change the current USER, the selected
“USER A” or “USER B” will show on display for 5 seconds.
•
Each user arranged 32 memories ( User A and memory1 preset in factory)
3.4.3 Recall radio preset memory
•
There are 32 preset for radio station .
•
When the radio is ON,
•
Press < >, < Preset - > to select the desired preset memory station.
•
When new preset memory key is pressed, MUTE is active. When keying the preset memory
has been released for 1 second, the selection of preset memory is considered as valid and the
radio will be tuned to that frequency immediately with MUTE idle.
When Radio is OFF, same operation for cooking timer memories recall
3.4.4 Store into memory
•
To store the tuning frequency of radio station being received into any of the preset memory,
press < MEM > once. The ‘MEM’ goes flashing
•
Select the desired memory station and page by pressing the corresponding key until its
number goes solid above ‘MEM’
•
Press < >, < Preset - > to select the desired preset memory station.
•
Press < MEM > again to confirm the process of storing. Then, ‘MEM’ goes solid.
•
Press other key to start its corresponding function.
When Radio is OFF, same operation for cooking timer memories store.
3.4.5 Search Up/Down
•
When the radio is ON, press < UP > once to change the receiving frequency up by 1 step
•
Press < DOWN > once to change the receiving frequency down by 1 step.
•
Press and hold < UP > to search the next radio station by moving the receiving frequency up.
•
Press and hold < DOWN > to search the next radio station by moving the receiving
frequency down.
3.4.6 AMS Using
•
When radio is on.
•
Press and hold < MEM Scan > for 3 seconds to active AMS mode.
•
In this mode, the radio will automatically scan the radio station and store the station that
had been scanned until scan up all the frequency or stored all the memory station, it will exit
automatically.
8 Of 10