SOUNDMASTER UR2050, Manual

Page: 9 / 12

UR2050 operating instruction of English
2.10.10 When no key has been pressed for 10 seconds, the system goes back to auto-run mode
2.11 Cooking Timer Value Preset
2.11.1 There are 6 preset Cooking timer
2.11.2 Press < Timer > once to enter the timer mode.
2.11.3 Press < UP > or < DOWN > to adjust the value (from 1 minute to 23hours and 59minute).
2.11.4 Press once < MEM > , the ‘Cook 1~6’ goes display. Press <> or <preset -> select
Location of memory for cooking timer,press < MEM > again to store it value and “T1~6” goes solid.
2.12 AOT (Automatically Off Timer)
2.12.1 Press < AOT > once to active AOT function, if device stay on the standby, will turn on the
device .
2.12.2 Press the key every time will change each 10 minutes, value of timer since 90 to OFF.
2.12.3 Press other key to start its corresponding function with the AOT timer is run at background.
2.12.4 When no key has been pressed for 10 seconds, the system exit AOT timer display mode, but
the AOT timer is run at background.
2.12.5
Once < AOT > was press, The current AOT value should show on display,
3 How to work of device
3.1 Using Cooking Timer
3.1.1 Press < Timer > once to enter the timer mode.
3.1.2 Press < UP > or < DOWN > to adjust the value (from 1 minute to 23hours and 59minute) or press
< > or < Preset - > to recall the preset value, press < Timer > to start the cooking timer.
3.1.3 When the timer is running press <Timer> to pause the timer. To restart the timer press < Timer >
again.
3.1.4 30 seconds before the kitchen timer run time has expired the device begins to acoustically
indicate,with individual signal tones, the arrival of the set time. Thereby the interval between the
individual tones becomes shorter and shorter. When the set time has arrived the kitchen timer's alarm
signal sounds as a continuous tone.
3.1.5 Press and hold < Timer > for 2 seconds to terminate the timer and leave, when the timer is
running.
3.2 When SDA Active
3.2.1 When the date/month/(year) matches with the SDA which has been enable, alert becomes
active.
3.2.2 As the SDA active, Sound of beep toggles at the Speaker for 10 minutes, Muted Radio even
radio ON & The “SDA” goes flash on LCD display
3.2.3 Press any key to start its corresponding function and the SDA will be terminate
3.2.4 When SDA is active, even key-lock has been switched on, press any key can terminate alarm.
3.3 When alarm is active
3.3.1 When the real time clock matches with the alarm which has been enabled, alarm becomes
active
3.3.2 As the alarm becomes active, the AOT if exists, is terminated immediately
3.3.3 If Beep sound alarm is selected,
A, Sound of beep toggles at the Speaker
B, The duration of alarm is 10 minutes
3.3.4 If Radio alarm is selected,
A, Radio On
7 Of 10