IR3000DAB / English Instruction Manual
Page 11
4.3.1 Set Time/Date (wizard)
The date and time are displayed as dd-mm-yyyy and
hh:mm AM/PM with the first value, dd, active (flashing).
Adjust each value with the
Select
control. As each
value is set by pressing the Select control, the next
value becomes active ready for adjustment
4.3.2 Auto update (from DAB, FM or Network) (wizard)
Auto-update works with data sent over DAB, FM or the Internet.
The clock is only updated when in a corresponding mode, so
It is best to select a mode you use regularly.
DAB
and
FM use
time signals broadcast with radio
transmissions.
Network
uses a time signal sent from the Frontier Silicon Internet radio portal when in any network
connected mode.
1. Select Update from DAB, Update from FM, Update from Network or No update.
2. If you are updating from the network, set your time zone.
3. If your country uses daylight saving, the automatically updated time from the network may
be wrong by one hour. When daylight savings are in effect (during the winter), turn on the
Daylight savings option to rectify this.
Note that if you are updating the time from DAB or FM, the
Daylight savings
option has no effect on
the clock's time.
The unit will auto update from the selected source when time information is available.
4.3.3 Set Format (wizard)
Allows you to change between 12 and 24 hour display,
Set Time/Date
05-02-2013
1:15 PM
