IR6500SW
/ English Instruction Manual
8
Manual Tune
BLUETOOTH
Note
: This device is not able to pair with
Bluetooth
-speakers or
Bluetooth
-headphones.
Before transmission between your Bluetooth device and the radio is possible, both devices must
be coupled. This process is called "pairing". The unit is served as a receiver, to receive music
stream to play on the unit.
If you have already coupled to a Bluetooth device before, this connection will be restored
automatically when both devices are in range and Bluetooth operation has been selected on the
radio. "Pairing" does not have to be repeated. This function may need to be activated in your
Bluetooth device, however.
1. Push the
“Menu”
button to display the selection menu for the different operating modes.
2. Turn the
“
TUNE/SELECT/VOLUME“
knob to select the operating mode Bluetooth and
push the
”
TUNE/SELECT/VOLUME“
confirm you selection.
3. Switch your Bluetooth device to which you want to connect the radio on and activate the
pairing mode here. The device scans for Bluetooth devices in the reception range.
4. When the radio is found, your Bluetooth device shows its name IR6500SW.
5. Select the radio at your Bluetooth device.
6. Start playback on your Bluetooth device.
Playback now takes place using the radio
SLEEP TIMER
You can set the timer to let the radio goes standby after the selected time elapsed in the range
of 15 minutes to 180 minutes.
Press the
“MENU” button to get in the main menu. Select
“Sleep Timer” and press “
TUNE/SELECT/VOLUME
” to confirm.
Turn the “
TUNE/SELECT/VOLUME“
until your desired Sleep
Time is displayed. Press the “
TUNE/SELECT/VOLUME
“
to
confirm your selection.
To manual tune to the frequency, long press
“TUNE/SELECT/VOLUME ”
on the unit, until you see
the "Tuning" appeared on the display, at the bottom right
corner. Use the
◄ / ► button on remote to tune the
frequency. When done, long press the
“OK”
button to
exit manual tune