IR6500SW
/ English Instruction Manual
2
POWER SUPPLY
➢
Ensure that the voltage is the same as indicated on the main unit identification plate.
➢
Connect the supplied USB type “C” cable to the DC IN 5V jack of the device. Plug the USB
connector into a suitable USB-Port.
➢
The LED indicator will light up while charging the built-in batteries. (Red light=charging;
Green light=Charged)
BASIC OPERATIONS
POWER ON / OFF
Press and hold the “
POWER
” button to torn the unit on.
During on mode, press and hold the “
POWER
” button to turn the unit off.
SELECTING MODES
During on mode, press the “
MENU
” button to get into the main menu. Turn the
“
TUNE/SELECT/VOLUME
” Knob until your desired mode is shown on the display and press the
“
TUNE/SELECT/VOLUME
” Knob to select the desired mode.
ADJUSTING VOLUME
Rotate the “
TUNE/SELECT/VOLUME
” knob to the right side to decrease or increase the
volume.
GETTING STARTED
Press and hold the Power button to turn the unit on.
SELECTING LANGUAGE
When you switch on the radio for the first time, you have to select the desired language.
CONNECT TO WIRELESS LAN (WI-FI)
Use the
“TUNE/SELECT/VOLUME”
knob to scroll through the characters, when the correct
one is highlighted, press
“TUNE/SELECT/VOLUME”
button to input the next character. When it
comes to the last character of the password and it is highlighted, press and hold
“TUNE/SELECT/VOLUME”
to confirm.
Note: The security code is case sensitive.
1. If this is first time use, the Configure Network wizard will
be displayed. Choose Yes to start configuring network.
Turn the
“TUNE/SELECT/VOLUME”
knob to highlight
Yes and press
“TUNE/SELECT/VOLUME”
to confirm.
Configure Network?
<Yes> No
