sound4 STREAM X Maintenance And Operation Instruction Manual Download Page 7

Page: 7 / 66

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

Tel.: +359 56 710710, Fax: +359 56 836700

Email: [email protected], Web: www.sound4.com

- 7 -

Statement of Discordancy

SOUND4 Ltd. reserves the right to make improvements or changes in the products described

in this manual which may affect the product specifications, or to revise the manual without notice.

The operation of SOUND4 products is determined largely by software. We routinely release

new versions to add features and fix bugs. Check the

www.sound4.com

web site for the latest

information available.

Typographic conventions

This manual uses the following typographic conventions:

Style

Used for

NOTE

Important notes and recommendations

Example

Used when example text is cited

“Menu” on page XX.

References

[OK]

Interface Interactive buttons.

Settings

Menu paths are represented as follows:

Settings> General> Backup

Summary of Contents for STREAM X



































































Search results

Summary of Contents for STREAM X

Reviews:

Related manuals for STREAM X

Brands by name

Popular brands

sound4 STREAM X, Maintenance And Operation Instruction Manual

Search results

Summary of Contents for STREAM X

Reviews:

Related manuals for STREAM X

Brands by name

Popular brands