sound4 STREAM X Maintenance And Operation Instruction Manual Download Page 63

Page: 63 / 66

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

Tel.: +359 56 710710, Fax: +359 56 836700

Email: [email protected], Web: www.sound4.com

- 63 -

New license

In case when X4 needs to be upgraded to X8 , new licenses would be provided:

1. Press [Load Licenses];

2. Go to the file directory, select the license and press [Open].

NOTE:

All licenses are sent/provided in a ZIP file. It is not needed the file to be unzipped

prior to their upload. They will be accepted by the program as they are.

3. Wait while the licenses are loaded;

4. Once the process is completed, press [OK] and close the Setup window so that the Main

control can appear.

NOTE:

Please be advised that X2 is non-upgradeable, and no channel expansion is possible.

Summary of Contents for STREAM X



































































Search results

Summary of Contents for STREAM X

Reviews:

Related manuals for STREAM X

Brands by name

Popular brands

sound4 STREAM X, Maintenance And Operation Instruction Manual

Search results

Summary of Contents for STREAM X

Reviews:

Related manuals for STREAM X

Brands by name

Popular brands