sound4 STREAM X Maintenance And Operation Instruction Manual Download Page 55

Page: 55 / 66

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

Tel.: +359 56 710710, Fax: +359 56 836700

Email: [email protected], Web: www.sound4.com

- 55 -

Configuration

– Combination of multiple parameters. A double click with the mouse cursor on

the ON box will enable the currently selected streamer.

The following protocols are available from the “Protocol” drop-

down menu:

IceCast2, ShoutCast V1, ShoutCast, RTMP, RTMPE, RTMPT,

RTMPS, RTMPTE, RTMPTS, RTSP, RTP mcast, HLS file, HLS

sftp, HLS ftp, HLS (sync).

The following encoder options are available from the “Encoder”

drop-down menu:

MP3, AAC, HE-AAC, HE-AAC v2, Opus, Vorbis, FLAC.

The following options are available from the “Adaptive Process”

drop-down menu: Off, HE-AAC - 16kbps, HE-AAC - 24kbps, HE-

AAC v 2 - 16kbps, HE-AAC v2 - 24kbps

Sample rates available from the “Sample Rate” drop-down menu:

Auto, 16k, 22k050, 24k, 32k, 44k1, 48k.

Summary of Contents for STREAM X



































































Search results

Summary of Contents for STREAM X

Reviews:

Related manuals for STREAM X

Brands by name

Popular brands

sound4 STREAM X, Maintenance And Operation Instruction Manual

Search results

Summary of Contents for STREAM X

Reviews:

Related manuals for STREAM X

Brands by name

Popular brands