65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel.: +359 56 710710, Fax: +359 56 836700
Email: [email protected], Web: www.sound4.com
- 82 -
Pre-EQ (Basic)
The 4-Band Parametric EQ section allows adjustment of the frequency response prior to the
main 3-Band processing.
Metering
– Displays the overall frequency response of the EQ section.
All four bands are fully parametric. The labeling of the bands is as follows:
•
FAT EQ
– the lowest band, very useful when problematic rumble or hum frequencies should
be eliminated, or when a little bump to make that low end punch pop through should be
added.
•
LOW EQ
– can be used for cutting some of the typical low midrange mud due to proximity
effect or to help enhance that classic big voice sound.
•
MID EQ
– adds intelligibility and clarity in the critical midrange frequencies.
•
HIGH EQ
– will add “sparkle” in the top end.
Pre-EQ (Advanced)
Metering
– Displays the overall frequency response of the EQ section.
All four bands are fully parametric. The labeling of the bands is as follows:
•
FAT EQ
– the lowest band, very useful when problematic rumble or hum frequencies should
be eliminated, or when a little bump to make that low end punch pop through should be
added.
•
LOW EQ
– can be used for cutting some of the typical low midrange mud due to proximity
effect or to help enhance that classic big voice sound.
•
MID EQ
– adds intelligibility and clarity in the critical midrange frequencies.
•
HIGH EQ
– will add “sparkle” in the top end.
Quick overview of the control options:
•
Frequency
– Allows the center frequency of the EQ band to be set.
•
Q
– Used to set the bandwidth of the band’s filter. Lower numbers result in a “wider” filter
and higher numbers result in a narrower filter with a sharper “Q”.
•
Gain
– Adjusts the gain of each band.
