8
GENERAL OPERATIONS
OTHERS ADJUSTMENT
If you press the Vol/SEL button (3) for several seconds, it will activate a
cycling mode of the following functions for user's selection.
Press and hold this button to go to DSP Mode. By turning this function
button, you will cycle thru Flat, Classic, Pop and Rock. Press the function
button to select your favorite DSP mode.
When in DSP mode, pressing the function button once will take you to ESP
Mode. Turning the function button will allow you to choose 12 seconds or 45
seconds ESP. Press the function button to select your desired ESP setting.
When in the DSP mode, pressing the function button twice will take you to
Beep Mode, (the key pad tone). Turning the function button will allow you
to choose ON or OFF. Press the function button to select.
VOL LAST/ADJUST
This function allows the user to set the volume level of the unit after it was
turned off and then turned on again. Choose VOL LAST if you want the
volume level Knob the same as it was before turning off. VOL ADJUST
allows to choose volume level.
SEEK MODE
SEEK 1: When SEEK 1 mode is activated, AUTO SEEK SCAN is stopped
when station is detected even user still push SEEK button.
SEEK 1: When SEEK 1 mode is activated, AUTO SEEK SCAN is stopped
when station is detected even user still push SEEK button.
SEEK 2: Auto SEEK SCAN is not stopped even if station is detected if user
pushes SEEK button. When releases SEEK button, then stop when station
is detected.
SELECT MODE
Press button (5) to go to different functions
RADIO OPERATION
AUTOMATIC MEMORY STORING & PROGRAM SCANNING
- Automatically Store Memory
Press AMS(MP3) button (13) for several seconds, the radio searches from
the current frequency and checks the signal strength until one cycle search
is finished.
And then 6 strongest stations are stored into the corresponding preset
number buttons.
- Program Scanning
Press AMS(MP3) button (13) shortly to scan preset stations. When the field
strength level is more than the threshold level, the radio will stop at that
preset number for several seconds, release mute and then search again.
STATION STORING
Press preset button (14~19)
1) RADIO MODE.
M1 ~ M6
- PRESET MEMORY is loaded when key is pressed for less than 1 second.
- PRESET MEMORY is saved when key is pressed for longer than 1 sec.
2) CD/ MP3 / FLASH Mp3
PLAY / PAUSE
Press preset button (14) is activated. During a PAUSE, DISC INDICATOR
flashes.
TOP
First song will play when Top key is pressed for longer than 0.5sec
during play.
INT
Press preset button (15): During INTRO ON, INT indicator comes on and
begins playing the first 10sec of each song, until the last song is played. It
begins playing the entire track from where INT started.
11
Summary of Contents for M305A
Page 1: ......