9
GENERAL OPERATIONS
- Tuner (radio)
- CD (MP3 CD)
to go to this mode must be have a CD in.
- Memory Card
to go to this mode must be have a Memory Card in.
- USB
to go to this mode USB device must be connected.
- AUX in put
DISPLAY
Press DISP button (6) to operate each display mode as follow:
MP3 MODE
- Time is displayed for 5sec when DISP key is pressed,it will return to its
previous display ( Folder, File name...) unless DISP key is pressed again.
From the clock mode, when DISP Key is pressed for longer than 1sec, clock
mode switches to clock Adjusting mode and the clock display begins
flashing. At this time clock can be changed by pressing (+/-), or the
ENCODER VOLUME.
LIQUID CRYSTAL DISPLAY
Exhibit current frequency and activated functions on the display (7).
FLASHING LED
If the front panel is not correctly installed on the main unit, the LED (8) will
be flashing.
RESET
RESET button (9) is placed on the housing and must be activated with either
a ball point pen or thin metal object. (Do not use sharp object to avoid
damaging the unit.) The RESET button (9) is to be activated for the following
reasons:
- Initial installation of the unit when all wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
NOTE:
If press RESET button (9), the unit can't work yet. please use a
cotton swab soaked in isopropyl alcohol to clean the socket on the back of
the front panel.
10
RADIO OPERATION
MO/ST SELECTOR
Press ST(20) button to select MONO or STEREO mode.
When “ST” appears in the LCD display. During the Fm receiver mode, press
the button to switch mono or stereo.
LOC/DX SELECTOR
Press LOC(21) button to select strong or weak station reception. It is set to
LOC mode when LOC(21) button is first pressed. “LOC” appears and only
local station is available. It is switched to DX mode when LOC(21) button
is pressed again. Both distance and local stations can be received.
LOUDNESS ON/OFF
Press LOU(22) button to increase the low frequency. This can improve the
sensitivity of your ears. And “LOUD” appears in the LCD when the loudness
mode is activated.
SCAN
Press scan button (27) to search radio stations. When a station signal
strength level is good,the radio will play that station for 5 seconds.
The Frequency will blink on the LCD during this process.
Press and hold scan button(27) more than 3 seconds to select the station
which you desired. The radio will stop scanning and play that station.
RADIO OPERATION
BAND SELECTION
At tuner mode, press BAND button (10) to select the desired band. The
reception band will change in the following order:
STATION SELECTION
Press TUNE/SEEK/TRACK FORWARD button (11) or TUNE/SEEK/TRACK
REVERSE button (12) shortly for manual tuning function.
When pressed for several seconds, the automatic tuning mode
(SEEK mode) is activated.
FM1 FM2 FM3 AM1(MW1) AM2(MW2)
Summary of Contents for M305A
Page 1: ......