INSTALLATION
NOTES ON INSTALLATION
2
● Choose the mounting location where the unit will not interfere with the
normal driving function of the driver.
● Before finally installing the unit, connect the wiring temporarily and make
sure it is all connected up properly and the unit and the system work properly.
● Use only the parts included with the unit to ensure proper installation. The
use of unauthorized parts can cause malfunctions.
● Consult with your nearest dealer if installation requires the drilling of holes
or other modifications of the vehicle.
● If installation angle exceeds 30 degrees horizontally, the unit might not
give its optimum performance.
● Avoid installing the unit where it would be subject to high temperature,
such as from direct sunlight, or from hot air, form the heater, or where it
would be subject to dust, dirt or excessive vibration. Do not expose the
equipment to rain or moisture.
DIN FRONT-MOUNT (Method A)
Installing the unit
1. Dashboard
2. Holder
After inserting the holder into the dashboard,
select the appropriate tab according to the
thickness of the dashboard material and bend
them inwards to secure the holder in (Fig. 1)
place.
3. Screw
17
BEFORE
PLAYING
DISCS
CLEANING THE CD
Before playing a CD, wipe it off with a clean, dust-free cleaning cloth. Wipe
the disc in the direction of the arrow.
Always insert the CD with the label side facing upwards.
If the CD is inserted with the printed side facing downwards, the device
may be damaged.
Note:
If there is already a CD in the CD slot , do not try to insert a second
CD. This may damage the device.
Always hold CDs by the edge. In order to keep the CD clean do not touch
the surface. Pull out the CD as follows.
Do not attach any sticker or adhesive tape on the CD.
Do not expose the CD to direct sunlight or sources of heating.
Do not leave CDs in a car if it parked in direct sunlight as that will lead to a
considerable rise in the temperature inside the car.
Note:
Do not use any solvents such as petrol or thinning agents.
Commercially available cleaning substances of antistatic spray will
damage the device.
Summary of Contents for M305A
Page 1: ......