REM ( REMOTE )
It is connected to sw12V with a trigger cable coming from
the head unit.
SPEAKER OUTPUTS
it connects SoundQubed amplifiers to speakers.
Minimum speaker cable is 12 gauge.
All single unit of SoundQubed digital monoblock amplifiers works
to 1ohm .
All linked SoundQubed digital monoblock amplifiers work to 2ohm.
GND ( GROUND CONNECTION )
It is connected to the negative or ground cables of the Vehicle.
Recommended cable is 4 ~ 0 gauge.
+12V ( POWER CONNECTION )
This must be connected to the fuse positive terminal ( +12V ) of
the battery.
Recommended wire is 4 ~ 0 gauge.
Q2-200
: 220W x 2
: 340W x 2
: 680W x 1
: 20Hz ~ 30KHz
: 105dB
: 200 <
: 8V ~ 0.2V
: 20Hz ~ 5KHz
: HPF/FULL/LP-BP
: 50Hz ~ 5KHz
: 0 ~ 18dB
: Included.
: 2 pcs
: Double sided board
: 4 ga
: 40A x 2 pcs
Q4-90
: 90W x 4
: 130W x 4
: 260W x 2
: 20Hz ~ 30KHz
: 105dB
: 200 <
: 8V ~ 0.2V
: 20Hz ~ 5KHz
: HPF/FULL/LP-BP
: 50Hz ~ 5KHz
: 0 ~ 18dB
: Included.
: 2 pcs
: Double sided Board
: 4 ga
: 40A x 2 pcs
Q4-120
: 120W x 4
: 170W x 4
: 340W x 2
: 20Hz ~ 30KHz
: 105dB
: 200 <
: 8V ~ 0.2V
: 20Hz ~ 5KHz
: HPF/FULL/LP-BP
: 50Hz ~ 5KHz
: 0 ~ 18dB
: Included.
: 2 pcs
: Double sided Board
: 4 ga
: 40A x 2 pcs
Specifications
Power @ 4ohm
Power @ 2ohm
Power @ 4ohm mono
Frequency response
Signal to noise ratio
Damping factor
Input sensitivity
High pass filter
X-over
Low pass filter
Bass boost
Remote control
Hand-wound power supply
Printed circuit board
Power terminal blocks
Fuse rate
DIGITAL MONOBLOCK OUTPUT ENDPANEL
CLASS AB MULTI-CH SPECIFICATIONS
HeadUnit
Remote Turn on
12V Battery
12V Battery
