RCA JACK INPUT
Connect preamp signal cables from the headunit to RCA input
of SoundQubed amplifiers
POWER & PROTECTION INDICATOR
Power LED, Green-lit shows correct operation.
Protect LED, RED-lits shows general malfunction, faulty
connection or 4 ways protection.
GAIN ( 5V to 0.15V )
Matching the output voltage of the headunit's RCA line-outs
to SoundQubed amplifier’s input section.
SUBSONIC CROSSOVER FREQUENCY
( 10 to 50Hz @ 24dB/Oct )
Control the high pass point for the speaker outputs to to
eliminate extreme low frequencies.
BASS BOOST ( 0 to 6dB @ Narrowed band 30 to 50Hz )
It controls boost.
REMOTE LEVEL CONTROL PORT
This port is for connecting turn-down remote level control
Remote level control adjusts the level.
LPF CROSSOVER FREQUENCY ( 35 to 250Hz @ 24dB Oct )
Controls the low pass point for the speaker outputs.
OUTPUT MASTER / INPUT SLAVE
OUTPUT MASTER / INPUT SLAVE connection makes 2pcs of
soundQubed amplifiers as daisy chain connection to 2 ohm.
Do not use output master/ input slave connection as 1 ohm.
SPEAKER OUTPUTS
it connects SoundQubed amplifiers to speakers.
Minimum speaker cable is 12 gauge.
1ohm for single unit & 2 ohm for daisy chain connection
OUTPUT POWER
Output Power @ 4ohm
Output Power @ 1ohm
Linked Power @ 2ohm
Linked Power @ 2ohm Max
Q1-1200.2
510W x 1
1300W x 1
2600W x 1
5200W x 1
Q1-750
300W x 1
750W x 1
1500W x 1
3000W x 1
Q1-2200.2
770W x 1
2300W x 1
4600W x 1
9200W x 1
Q-4500
1400W x 1
4560W x 1
9120W x 1
18240W x 1
DIGITAL MONOBLOCK OUTPUT POWER
DIGITAL MONOBLOCK INPUT ENDPANEL
L
R
HeadUnit
Remote Control
