•
Fourth press: Dimming Red Light
with Sleep
Enhancement®: Pressing the Light Control Button a
fourth time displays a red dimming light with pulsation
that slows down as the light dims.
•
Fifth press: Off.
Note:
Choosing Your Initial Brightness
• You can choose your initial brightness.
• Once you have selected your light program, press and
hold down the Light Control Button until you reach your
desired brightness level. This will be the brightness level
that your mask starts with every time you use it.
2. Choose your timer setting:
• The
Points of Glo
can be set to dim over 10, 20 or 30
minutes. To select, remove the Light Control Cover and
slide the timer switch to the 10, 20 or 30 minute position.
IMPORTANT:
At bedtime every night you do not need to
repeat the program selection described above. Simply
press the Light Control Button ONCE and the program
you initially selected and used the previous night will
start. The Light Control Button can be pressed by
pushing the rubber dome on the Light Control Cover.
STEP 3
• Replace the Light Control Cover.
6
