Sound Devices SL-6, User Manual

Page: 11 / 20

11
SL-6 POWERING AND WIRELESS SYSTEM
Radio Frequency (RF) Filter
The SL-6 provides RF filtering which can allow operation in the presence of in -
terfering signals such as cell phones and TV stations. Selection is provided for
four different frequency ranges of operation.
To enable the RF filter:
1. Press the MENU button to access the Main menu.
2. Turn and press the Headphone encoder to select SL-6 > Antenna Filter.
3. Turn and press the Headphone encoder to select a filter range.
Using Wireless Receivers
The SL-6 supports SuperSlot and unislot receivers on a DB-25 connection. The
SL-6 receiver slots provide power and audio connection to both types of receiv -
ers. Additionally, SuperSlot receivers can be controlled from the 688 interface.
To connect antennas to the SL-6:
X
Connect each antenna directly to each BNC Antenna Connector on the SL-6.
To connect a receiver to the SL-6:
i
Mounting procedures for receiver models may vary. Refer to the receiver manufac-
turer’s documentation for your receiver and follow the specific mounting instruc -
tions.
⚠ The Lectrosonics SRb5P can not be connected to slot 1 of the SL-6. Using
the blue spacer (Provided with the receiver), the SRb5P can be connected
to slot 2 or 3.
1. Power off the 688.
2. The SL-6 ships with rubber slot protectors that hold the SMA antenna con -
nectors with right-angle adapters secure during transport. These must be
removed prior to use, so remove the connector, then pull the rubber cover
off to expose the chosen slot.
i
Do not discard protectors; Sound Devices recommends storing the connectors with
their right-angle adapters in the rubber slot protectors when not in use.
3. Slide the receiver into slot on the SL-6. If necessary, use the provided
spacer.
4. Screw the four mounting screws through the receiver and into the SL-6.
⚠ Use only the screws provided with the receiver. Longer screws can dam-
age the SL-6.
5. Attach each antenna distribution lead to the receiver by screwing the SMA