background image

PIX 250i User Guide and Technical Information

9

Menu & N

avig

ation

Other audio related settings are accessible from the Setup Menu option 

Audio

.

File List

Press the FILE button (keyboard: F2) to display the File List; A list of all of the recorded takes. Takes 

are arranged chronologically and grouped by Reel. Turn the Control Knob to highlight an item. Press 

Play to start playback of the highlighted take. Press the Control Knob to perform functions based on 

which item is highlighted:

6

7

8

5

2

3

4

1

1) 

Next Take

 

Information for the next take.

2) 

Current Take

 

Information for the current take.

3) 

Reel Group

 

A group of clips organized by reel num-

ber. Takes below are part of the indicated 

reel. Number in brackets indicates num-

ber of clips in the reel. Press Control Knob 

to expand or collapse list of takes in this 

reels.

4) 

Multi-File Take

 

Take consisting of multiple files. Number 

of files in the take represented by number 

in brackets. Press Control Knob to expand 

or collapse list of files in this take. Files 

indicated by indented text.

5) 

Take

 

Represents a single take. Press Control 

Knob to view Take Details Screen or edit 

metadata. Press Play to play take imme-

diately.

6) 

Name

 

The name or number of the take, file, 

or reel. Number in brackets indicates 

amount of clips in the reel or amount of 

files in the take.

7) 

Date and Time

 

Date and time the take or reel was cre-

ated.

8) 

Size

 

Total size of the take, file, or reel.

The selected drive is displayed on the top of the screen. To view the contents of other drives, scroll 

to the top of the list; A pop up box appears with a list of all available drives. Select the desired drive 

and press the Control Knob.

Summary of Contents for PIX 250i





















































































Reviews: