manualshive.com logo in svg

Sound Devices MixPre II Series, Manual, Page: 40 / 73

Share
Download
Sound Devices MixPre II Series Manual Download Page 40

File Splits

To conform to the Broadcast WAV File standard ,the maximum size of a file recorded by the MixPre II is 4GB. If a recording exceeds
this limit, the MixPre II will automatically begin recording a new file. The recording process is seamless, meaning the two files can be
joined together in post with no loss in audio.

Timecode

When timecode is enabled, it is displayed on the home screen beneath the current filename. Standard timecode is displayed as
HH:MM:SS:FF. Drop-frame timecode is displayed with a semicolon between the seconds and frames fields: HH:MM:SS;FF.

Each time you press record, the current timecode value is stored inside the Broadcast WAV file. Most popular video editing
applications can read this timecode value to help sync the audio with picture.

When power is removed, the internal battery maintains accurate timecode for up to 4 hours. An alert will be issued whenever the
timecode generator (in Free Run and Time of Day timecode modes) has reset due to internal battery depletion. This internal battery
is automatically charged anytime the MixPre II is powered on.

TC Mode

Select between Free Run, Time of Day, Rec Run, BNC In (MixPre-10 II only), Aux In 1, Aux In 2, HDMI TC In, HDMI FUJIFILM or
Off. When using Aux In 1 or 2 for Timecode, be sure to set Inputs>Aux In Mode to Timecode.

Frame Rate

Select between 23.98, 24, 25, 29.97nd, 29.97dF, 30, and 30 dF. Setting the frame rate is not necessary when using BNC, Aux, or
HDMI In.

Jam

With the MixPre to Free Run and the frame rate set to the source’s frame rate, tap Source and select BNC In or Aux TC. Tap Jam
TC to jam timecode. Jamming is successful if Diff = 00:00:00:00.

Set TC

Manually set timecode.

BNC In

MixPre-10 II only. Set BNC to Timecode or Word Clock.

BNC Out

MixPre-10 II only. Set BNC to Timecode or Word Clock.

Sync REF

MixPre-10 II only. Select from BNC In or Internal. When BNC In is selected, the MixPre-10 II can be set to sync to an external
timecode or word clock sync reference connected to BNC In.

Set UBITS

MixPre II Series

User Guide

39

Summary of Contents for MixPre II Series










































































Reviews:

No comments