manualshive.com logo in svg

Sound Devices MixPre II Series, Manual, Page: 12 / 73

Share
Download
Sound Devices MixPre II Series Manual Download Page 12

1: Power LED

Glows when the MixPre II is powered on.

2: Channel Knobs

Sets the input gain for the channel. Press in on knob to access channel screen.

3: Channel LED Ring

Provides visual indication of channel signal condition, solo and mute.

4: Transport Controls

A joystick (with its illuminated LED ring) on the front panel is used to perform various transport control functions. (see Transport).

5: Star (* & **) Switch

Provides a user-assignable hardware switch to frequently used functions. See Shortcuts.

6: Touch Screen

The sunlight-viewable, high-resolution, touch-screen is used to navigate the MixPre II user interface.

7: 4-Pin Hirose DC Input

Accepts DC voltages from 10–17 V for powering. [pin-4=+, pin-1=-] Works with included XL-WPH3.

8: Battery Contacts

Accepts power sled accessories designed for MixPre II. Allows powering from AA or Sony L-Mount batteries, such as the included
MX-8AA.

9: SD Card Slot

Insert SD card for recording.

10: Allen Wrench & Anti-Rotational Pin

Magnetically attaches to the MixPre II for safe keeping. Used to attach MixPre II to cameras and tripods via ¼-inch-20-thread
captive screw on MixPre II top panel.

11: Inputs 1-8 Female XLR / 1/4” TRS Combo Jacks

Active-balanced analog microphone or line-level inputs. Inputs 1-4 on left panel, inputs 5-8 on the right. [pin-1 = ground, pin-2 = hot
(+), and pin-3 = cold (-).

12: BNC Timecode or Word Clock Output

Menu-selectable between timecode or word clock functionality. Set to timecode to send LTC timecode to cameras, digi-slates or
other timecode-enabled equipment. Set to word clock to use the MixPre-10 II as a master precision clock source for external
equipment.

13: USB-A Port

1. USB keyboard.
2. Auto-copy to USB drives.
3. USB to approved 3rd party control surfaces.
4. USB hubs to support multiple devices.

14: USB-C Port

Used to connect to a computer for USB audio or transferring files from the SD card.

15: Power Switch

Turns the power on and off.

16: BNC Timecode or Word Clock Input

Menu-selectable between timecode or word clock functionality. Set to timecode to receive LTC timecode from a camera or timecode
generator. Set to word clock to sync to an external clock source.

17: X1/X2 Output

Unbalanced stereo 3.5 mm female connector. Routing determined in the Outputs menu. [Sleeve = ground, tip = X1, ring = X2].

18: Headphone Output

MixPre II Series

User Guide

11

Summary of Contents for MixPre II Series










































































Reviews:

No comments