User Guide
12
F
eature
D
escription
R Routing Indicator
Illuminates when the input channel has been routed to the right bus.
•
Off = not routed
•
Yellow = post-fade routing
X2 Routing Indicator
Illuminates when the input channel has been routed to the X2 output.
•
Off = not routed
•
Green = pre-fade routing
•
Yellow = post-fade routing
SEL Button
Selects or deselects an input channel, or multiple input channels for
adjustment.
Each SEL button illuminates when a channel is selected.
While selected, an input channel may be routed to L, R, X1 or X2.
It also may be turned on, armed, or named. Additionally, high-pass
filtering, phase inversion, or EQ may be applied.
For more information, see
Selecting One or More Input Channels
.
ON Indicator
Illuminates yellow to indicate the input channel is on.
ARM Indicator
Illuminates red to indicate the corresponding isolated track (ISO) is
armed for recording.
MIXASSIST Indicator
Illuminates to indicate MixAssist auto-mixing activity. When the input
is open, the LED is green. As the input closes, the LED is turned off.
PFL Buttons
(Pre-/Post-Fade Listen)
Activates or deactivates pre- or post-fade listen of inputs 1-12 to the
headphone monitor.
Linear Faders
100 mm low latency linear controls for adjusting the fader levels of
inputs 1-12. Ranges from Off, - 80 to +16 dB.
Each input’s linear fader gain is displayed on the mixer’s Input
Settings screen. Calibrate linear faders to 0 dB via the mixer’s
SYSTEM > Fader/Pan Calibration menu.
LED Meters
Displays 7-segment pre- or post-fade metering, plus pre- and post-
fade limiter LED indicator for input channels 1-12.
Summary of Contents for CL-12
Page 1: ... CL 12 Linear Fader Controller for the 6 Series User Guide ...
Page 4: ...User Guide 4 ...
Page 6: ...User Guide 6 ...
