Sound Devices CL-12, User Manual

Page: 11 / 29

11
CL-12 LINEAR FADER CONTROLLER
F
eature
D
escription
LED Output Meters Displays 22-segment metering levels, as well as both ARM and LIM
(limiter) LEDs for L, R, X1, and X2.
i
LED meters may be configured to display either output or track
levels.
For more information, see Configuring Output Meters (688 only) .
Power LED Illuminates green when the CL-12 is powered on via the USB connec -
tion to an attached 6-Series mixer.
Output Controls There are four rotary controls or “pots” in the OUTPUTS section,
which may be used for routing as well as adjusting output or track
levels. Press to route or arm; turn to adjust level.
For more information, see
Adjusting Output or Track Levels and Arm -
ing L, R, X1, X2 Tracks .
Left: Channel Strip Section
The area that spans the majority of the mixing surface comprises 12 channel
strips. Each strip is comprised of 12 linear faders, SEL and PFL buttons, LED
indicators and LED meters. The CL-12’s low latency faders allow for responsive
level adjustment.
i
Not all features described here are available with every mixer. For more
information, see CL-12 Comparison Chart .
F
eature
D
escription
X1 Routing Indicator Illuminates when the input channel has been routed to the X1 output.
• Off = not routed
• Green = pre-fade routing
• Yellow = post-fade routing
L Routing Indicator Illuminates when the input channel has been routed to the left bus.
• Off = not routed
• Yellow = post-fade routing
EQ LED Indicates when some form of EQ has been applied to the input
channel. Illuminates blue if any LF, MID, or HF EQ band is set to non-
zero gain for the selected input.