Sound Devices 888 Manual Download

Page: 48 / 51

888

User Guide

FCC & ISED Compliance Statements

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Changes or modifications not expressly approved by the manufacturer could void the user’s authority to

operate the equipment.

This device contains transmitter module FCC ID: XF6-M7DB6

This device contains transmitter module IC: 8407A-M7DB6

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter-

ference in a residential installation. This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

FCC & ISED User Statement

This device complies with FCC and ISED RF exposure limits for general population / uncontrolled environments.

Cet appareil est conforme à la norme FCC et ISED les limites d’exposition pour la population

générale / l’exposition incontrôlée.

A separation distance of at least 20cm must be maintained between the antenna and all persons. This device

must not be co-located with any other antenna or transmitter.

This device (containing FCC ID: XF6-M7DB6, IC: 8407A-M7DB6) has been approved to operate with the

antenna type listed below:

Model: GW.71.5153 Type: 2.4/5.8GHz Dipole Antenna

Manufacturer: Taoglas Max. Gain: 3.8dBi (2.4GHz), 5.5dBi (5.8GHz)

No change to the antenna type is permitted. Any change to the antenna could result in the device exceeding

the RF exposure requirements and void the user’s authority to operate the device.

This Device complies with Industry Canada License-exempt RSS standard(s). Operation is subject to the

following two conditions: 1) this device may not cause interference, and 2) this device must accept any in-

terference, including interference that may cause undesired operation of the device.

Cet appareil est conforme avec Industrie Canada, exempts de licence standard RSS (s). Son fonctionne-

ment est soumis aux deux conditions suivantes: 1) ce dispositif ne peut pas causer d’interférences, et 2)

ce dispositif doit accepter toute interférence, y compris les interférences qui peuvent causer un mauvais

fonctionnement de l’appareil.

Incorrect use of batteries poses a danger of explosion. Replace only with the same or equivalent type.

Properly recycle batteries. Do not crush, disassemble, incinerate, dispose in a fire or expose batteries to high

temperatures.

Summary of Contents for 888




















































Search results

Summary of Contents for 888

Reviews:

Related manuals for 888

Brands by name

Popular brands

Sound Devices 888, Manual

Search results

Summary of Contents for 888

Reviews:

Related manuals for 888

Brands by name

Popular brands