888
User Guide
28
System
TONE SETUP
Selects the level, frequency, and routing of the internal
tone generator.
a. Level- Selects the level of the tone generator from -20 - 0 dBFS in 1
dB increments. [-20 - 0 dBFS]
b. Frequency- Selects the frequency of the tone from 100 to 10 kHz in
10 Hz steps. [100-10 kHz]
c. Track- [1-16]
d. Output- [L,R, X1-X6]
e. Bus- [L,R, 1-8] (Use toggle Switch Action menu to select tone as
Continuous or L-ident.)
NOTIFICATION BELLS
Selects settings for the notification bells.
a. To HP- Routes notification bell tones to the headphones. [HP-L,
HP-R]
b. To Bus- Routes notification bell tones to the buses. [L,R, 1-8]
c. When…- Selects when the notification bell tones are used. [Rec/
Stop, Space Low, Power Low, Warning Popup]
d. Level- Selects the level at which the notification bell tones will be
played in 1 dB increments. [Muted, -60 to -12 dBFS]
FADER CALIBRATION
Selects the option to manually calibrate all
faders.
TIMECODE CALIBRATION
Tunes the 888 system clock to an
external LTC signal.
BRIGHTNESS
Selects the brightness of the LED display and front
panel LEDs.
a. LED Brightness- Selects the front panel LED brightness in 10%
steps. [1%-100%]
b. Selects the front panel LCD display brightness in 10% steps. [10%-
100%]
TIME/DATE
Selects the current date and time.
a. Time Format- [12*, 24 hr]
b. Date Format- [mm/dd/yy*, dd/mm/yy, yy/mm/dd]
c. Set Time/Date- Selects the current date and time.
d. Time Zone- [-12 to +13 hours GMT]
e. Daylight Saving- [On, Off*]
TOGGLE SWITCH ACTION
Chooses what function is assigned to
the toggle switches.
MENU + PFL SWITCH ACTION
Chooses what menu is assigned to
a Menu + PFL Switch action.
HEADPHONE ENCODER MODE
Selects default operation of the HP
encoder. [Vol/Preset*, Preset/Vol]
XL-AES
Selects powering of XL-AES accessory [On, Off]
VERSION INFO
Indicates current firmware version.
REGULATORY
Displays relevant compliance information.
FIRMWARE UPDATE
Selects any PRG update files present on any
media.
