Sound Devices 633 User Manual And Technical Information Download Page 71

Page: 71 / 84

Front Panel Button Shortcuts

Function

Key Sequence

Action

False Take

Press and hold the Headphone Encoder then slide the Transport Control left

(Rewind).

Moves take to FALSETAKES folder and decrements take number.

Scene Increment

Press and hold the Headphone Encoder then slide the Transport Control right

(Fast Forward).

Increments the scene name according to the Scene Increment Mode (Setup

Menu option

FILE STORAGE > Scene Increment Mode

)

Take List

Press and hold the Menu Button then press the Headphone Controller.

Enters the Setup Menu.

Arm / Disarm

Track

Press and hold the Meters Button then press the Select Encoder.

Toggles the armed status of the highlighted track on the Main Screen.

Phrase List

Press and hold the Headphone Controller then slide the RTN / FAV Switch right.

Accesses the phrase list and applies the selected phrase to the last take re-

corded (during standby) or the currently recording take (during recording).

Scene Name

Press and hold the Headphone Controller then slide the RTN / FAV Switch left.

Edit the scene name. When used during record, edits the current scene name.

When used during stop, edits the next scene name.

Alternate Tone

Mode

Press and hold the Select Encoder then slide the Slate/Tone Switch right.
Engages the tone with the alternate Tone Mode. The alternate Tone Mode is the

mode that Setup Menu option

SYSTEM > Tone Mode

not

set to.

Toggle Playback

Card

Press and hold the Headphone Encoder then slide the Transport Control down

(Play).

Changes the target media between SD or CF. Target media is indicated by a

green background on the Main Screen.

LED Brightness

Press and hold the Menu Button then rotate the Headphone Encoder.

Adjusts the brightness of all LED’s.

LCD Brightness

Press and hold the Menu Button then rotate the Select Encoder.

Adjusts the backlight level of the LCD.

LCD Daylight

Mode

Press and hold the Headphone Encoder then press the Select Encoder.

Toggles between standard and Daylight mode of User Interface.

Frame rate /

Sample rate

display toggle

Press and hold the Meters Button then slide the RTN / FAV Switch left.

Toggles display of Timecode frame rate information and Audio sample rate

information between Main Screen and RTN Screen.

ont P

anel Butt

on Shor

tcuts

633 User Guide and Technical Information

Summary of Contents for 633





















































































Search results

Summary of Contents for 633

Reviews:

Sound Devices 633, User Manual And Technical Information, Page: 71 / 84

Search results

Summary of Contents for 633

Reviews: