Sound Devices 633 User Manual And Technical Information Download Page 63

Page: 63 / 84

Storing and Recalling Settings

The 633 can store and recall user settings to User Setup Files on the SD card, CF card, or internal

memory. User Setup Files contain all settings made in the Setup Menu and all Input Settings (includ-

ing routing). Multiple, custom-named setup files can be saved to the CF or SD card. Additionally,

four setups can be saved to the 633’s internal memory where they will be available even when no CF

or SD card is inserted.

To save a User Setup File, access the Setup Menu option

Quick Setup

. Select the Save option for the

desired storage area and enter a name for the Setup File.

•

The

INT1

INT2

INT3

, or

INT4

areas will hold one setup each. Settings stored to these areas will

overwrite any settings previously stored there.

•

Saving a Setup File to the CF or SD card will create a folder named

SETTINGS

(If it is not already

present) and place the Setup File in that directory. If a Setup File with the entered named already

exists, the previous Setup File will be overwritten

Setup Files stored on the CF or SD card can be deleted from the File List. To delete a Setup File from

the CF or SD card:

1. Press the

Menu Button to enter the Setup Menu.

Use the Headphone Encoder to select option

FILE STORAGE > File List

Use the Headphone Encoder to select either CF or SD.

Use the Headphone Encoder to select the

SETTINGS

folder.

Use the Headphone Encoder to highlight the Setup File to be deleted.

Slide the RTN / FAV Switch to access File Options for the Setup File.

Use the Headphone Encoder to select

Delete

ing and R

ecalling Se

ttings

633 User Guide and Technical Information

Summary of Contents for 633





















































































Search results

Summary of Contents for 633

Reviews:

Sound Devices 633, User Manual And Technical Information, Page: 63 / 84

Search results

Summary of Contents for 633

Reviews: