After connecting all of the component systems, turning on the relevant equipment and equipping the remote
control with the batteries, the user is now ready to use the DVD video player.
Preparation
a. Turn on the TV set.
b. If the amplifier is connected, you should turn on the amplifier and
select the corresponding mode of the amplifier according to your
DVD video player.
c. Turn on the player.
1. Press the POWER button of the DVD video player to
turn on the player.
Switch the input mode of the TV to either VIDEO IN or AVI 1, 2 or
3 (depending on the Model of the TV).
2. Press the OPEN/CLOSE button on the player or remote
control to eject the disc tray.
a. After the disc tray is ejected, insert a disc with label side upward into
the disc tray.
3. Alternatively Press PLAY
The player recognizes the format of the disc automatically, and the
result will appear on the display screen of the player. Then the player
will automatically play the program. At any time you can change the
selected track by inputting a new track number.
Basic Play
b. Press the OPEN/CLOSE button on the player or the remote control to close
the tray or for Turbo Load - press desired track number, or 1 to start playing a movie.
11
AUDIO SETUP PAGE CONTINUED
SPDIF SETUP
(DIGITAL OUTPUT
SETUP)
SPDIF OUTPUT
(DIGITAL OUTPUT)
SPDIF/OFF
(Turns "off" the
digital outputs of
player.)
SPDIF/RAW
(Activates the
optical outputs of
the player.)
SPDIF/PCM
(Activates the
coaxial outputs of
the player.)
(Note: At any time you may exit the menu by pressing the SETUP button.)
Features Setup
DOLBY DIGITAL
SETUP
DUAL MONO
(For use with the
Karaoke CD+G
format.)
STEREO
L-MONO
R-MONO
MIX MONO
DYNAMIC
(Audio compression
ratio setting.)
FULL
OFF
6/8
4/8
2/8
CENTER DELAY
+
- 4 MS
- 2 MS
0 MS
+
- 12 MS
- 6 MS
0 MS
REAR DELAY
LARGE
SMALL
CENTER
FRONT
LARGE
LARGE
SMALL
SMALL
OFF
OFF
REAR
22
Notes:
1. During playback, if the picture is not in full-screen, or the edge is
covered, or there is no picture, you must change the video output
setting to the local corresponding TV signal format: PAL or NTSC.
2.
When a appears on the TV screen, it indicates that the operation
is invalid or can`t be accepted by the player. This is controlled largely
by the programming on the DVD disc; therefore, it will vary from DVD
to DVD.
CHANNEL DELAY
(This feature allows the user to alter the delay to different speakers, according to the distance from the
speakers the user is.)
1
2
3
