Soto SOTO-Y8 Operation Manual Download Page 5

Safety Precautions

05

To reduce the risk of electrical shock, fire or injury to person(s) read the following:

Running Environment Cautions

Use only a 220-240 volt outlet with grounding wire receptacle.

Do not use the unit in an enclosed space where oxygen, flammable, explosive or toxic vapors are given 

off by oil base paint, paint thinner, some moth proofing substances

It may cause explosion or fire.

The product cannot be used in high-temperature, wet or watery places. Best working condition is 0-40

0

C

 

and relative humidity of < 75%. 

Unit Operation

Do not operate the unit without filters. Make sure remove plastic packaging from the filters before operation.

Do not use the unit if the power cord or plug is damaged or the connection to the wall outlet is loose.

When removing the power plug, always hold the plug and never pull by the cord.

Do not handle plug or appliance with wet hands. Electrical shock or fire from short circuit may occur.

To avoid causing fire do not attempt to disassemble the unit - only certified technicians should do this.

Stop the unit and unplug the power when maintenance.

Do not insert fingers or foreign objects into the intake or air outlet.

Keep hair, loose clothing, fingers and all parts of body away from openings and moving parts.

Do not use the unit near or on hot objects, such as range or where it may be exposed to steam.

Never look directly at UV lamps. Direct exposure to germicidal light can cause temporary or chronic

damage to your eyesight, or even blindness.

Do not wipe the outside, inside or any parts of the unit with flammable substances, it may cause fire! 

Do not wash or reuse the HEPA filter and Activated carbon filter.

Photo catalytic is permanent, never needs replacing. When there is dust on it, clean the dust off using a 

vacuum cleaner dusting brush. Do not wash it in water.

Summary of Contents for SOTO-Y8

















Reviews: