AUTO
2
3
Care and Maintenance 1
13
Replacing the HEPA filter
When the 3
rd
circle on the sensor plate flashes, the
HEPA filter needs to be replaced.
1. Stop the operation and unplug the unit.
2. Open the bottom plate, take out the used HEPA
filter and replace with a new one.
3. After replacing the HEPA filter, hold the POWER
button to reset the time for the HEPA filter.
To maintain optimum performance of this air purifier, the HEPA filter, the Activated carbon filter and
the UV lamp need to be replaced when the indicator lights are flashing.
When maintenance on the unit, be sure to unplug the power cord, and never handle the plug with wet
hands. If so, electrical shock and bodily injury may occur as a result.
Main unit
Wipe with a dry, soft cloth for stubborn stains or dirt. Do
not use volatile fluids, Benzene, paint thinner, polishing
powder, this may damage the surface.
Do not use detergents, detergent ingredients may
damage the unit. Keep the unit away from water.
Schematic diagram of sensor plate panel on
top of the unit. After replacing the filters and
UV lamp, hold the POWER button to reset
the indicator light.
The 3
rd
circle
flashes, replace the
HEPA filter.
The 2
nd
circle
flashes, replace the
activated carbon
filter.
The inner
circle
flashes, replace the
UV lamp.