Operation 3
12
Remote Control Operation
8
1
4
5
2
6
TIME
3
7
1 POWER Button:
The unit will start operating when the POWER
button is pressed. Pressing the button again will stop operation.
2 SPEED Button:
The fan speed can be switched among L- M- H-
Turbo- AUTO settings.
3 LOCK Button:
When pressed, all the operation will lock at the
desired speed except the NIGHT button.
4 NIGHT Button:
When pressed, all the indicator lights on the display
panel will go out.
5 UV LAMP Button:
Turns UV lights on and off.
6 TIMER Button:
The set time switches every time the button is
pressed as shown below: 1h - 2h - 4h - C2 (Cycle mode) - Cancel.
7 NEG. ION Button:
Turns negative ions on and off.
8 RESET Button:
Pressing the reset button 3 times will reset the
replacement indicator lights.
RF Remote Control
Before using the RF remote control
1. As soon as the unit is plugged in, press and hold the
POWER button on the remote control for 5 seconds.
2. The indicator light will start flashing and this means the
configuration is succcessful. The unit can now be operated
with the remote control.