© 1996-2021 SOTA Instruments Inc.
Page 10 of 12
|
www.sota.com
The Silver Pulser Model ZBB2 Manual
TURNING THE UNIT ON
5. Turn the unit ON by rotating the ON/OFF knob clockwise until it clicks. It is not
necessary to turn up the intensity.
The WHITE light should remain off or be dimly lit. If on, refer to Notes below.
The GREEN and RED
lights will continue to flash when making Ionic~Colloidal
Silver.
6. Stir occasionally with a non-metal utensil. Occasionally, wipe off the grey or black
silver oxide that builds up on the Silver Wires.
7. Two cups (16 ounces or 500 ml) for 15 minutes will produce a 3 to 5 ppm batch of
Ionic~Colloidal Silver, depending on the brand of distilled water. The concentration
of silver is measured in parts per million
or ppm.
8.
When finished, wipe the Silver Wires with paper towel to remove residue. Buff
lightly when needed to keep them free of sediment. Harsher buffing will wear away
the silver faster.
Notes:
Impurities: If the WHITE light on unit comes on while making Ionic~Colloidal
Silver, it means there are too many impurities in the water. Try a different brand of
distilled water. The WHITE light also comes on if the two wires are touching.
Color: Ionic~Colloidal Silver remains colorless to about 5 or 6 ppm. At a slightly
higher ppm it will be a pale gold color. Do not drink if it is darker than pale gold or if
it is dark grey as this indicates a higher level of impurities or larger particle sizes.
Clarity: The silver electrolyte should be clear. Do not drink if it is cloudy.
Storage: Pour the Ionic~Colloidal Silver into a dark glass bottle—never metal—and
store in a dark, dry place. Over time, light will degrade Ionic~Colloidal Silver by
turning the electrolyte grey or black. Discard if this occurs.
When made and stored properly, Ionic~Colloidal Silver retains freshness for many
weeks. It is suggested, however, that you use as soon as possible. If settling occurs, it
is losing potency. Do not drink any sediment.
Do not freeze, refrigerate, or expose Ionic~Colloidal Silver to extremes of
temperatures as its potency may be affected.
Save on Batteries: When making Ionic~Colloidal Silver the unit can be powered by
an AC-DC wall adaptor. See ‘Optional Power Input’ on page 12.
