© 2014-2021 SOTA Instruments Inc.
Page 15 of 16
|
www.sota.com
The Silver Pulser Model SP7 Manual
To operate the Ionic~Colloidal Silver Function from a 12 Volt DC source, such as an
automobile battery or an appropriate Solar Panel, purchase a Universal Power Cord
with Tip or Center Positive polarity.
OUTPUT SPECIFICATIONS
The output voltage is a nominal 31 Volts.
Micropulsing Application: Frequency through the metal pins is ~3.92 Hz or ½ of the
Earth Schumann frequency of 7.83 Hz, (+/- 1 Hz) with a Bi-Phasic Square Wave @ 31
Volts (+/- 1 Volt) peak per cycle.
Maximum current through the metal pins is ~8 milliamperes into 1,000 ohms, ~12
milliamperes into a short circuit at 31 Volts peak per cycle.
Ionic~Colloidal Silver Application: The maximum current through the Silver Wires
is 1.0 milliamperes (+/- 0.5 mA) at 31 VDC compliance voltage when the Silver
Wires are touched together to short the circuit.
TROUBLESHOOTING
Troubleshooting Guides for both the Micropulsing and Ionic~Colloidal Silver
functions of the Silver Pulser are available at www.sota.com/manuals. These Guides
are a great tool to check if you are experiencing any issues with your unit.
COUNTRIES THAT PARTICIPATE IN MANUFACTURING
The manufacturing of the SOTA Products is a global collaboration. The following
countries have participated in the making of the Silver Pulser (listed in alphabetical
order): Canada, China, Hong Kong, Malaysia, Mexico, Taiwan, Thailand and the
USA
REPLACEMENT ACCESSORIES
To replace your accessories, please contact your supplier.
WARRANTY
The Silver Pulser Model SP7 is covered by a three (3) year limited warranty. Please
keep proof of purchase. Warranty is void if the failure is due to abuse or negligence.
SOTA reserves the right to make changes to the Silver Pulser without obligation.
