© 2014-2021 SOTA Instruments Inc.
Page 7 of 16
|
www.sota.com
The Silver Pulser Model SP7 Manual
Options:
a. If preferred the unit can be placed in a pocket. A
longer Micropulsing Cord is needed for this option.
b. If the Arm Band is too large, a shorter Arm Band is
available.
5. Insert the
Micropulsing Cord into
the jack on the unit as
shown in image 5. The
USB symbol on the
plug should be facing
up. When the plug
is positioned correctly, it will slide in gently. Do not
force.
COTTON SLEEVES OPTION
6. Slide the clip on the back of the Silver Pulser into
the holding clip on the Arm Band as in image 6.
7. Put the Wrist Strap on with the Velcro
®
side of the
Wrist Strap face-out rather than towards the skin.
8. Prepare one pair of Cotton Sleeves. Each Cotton Sleeve
is sewn on three sides; to find the open end of the
Cotton Sleeve, squeeze the long sides of the sleeve and
the unsewn end will pop open.
9. Attach one Cotton Sleeve to the Wrist Strap in line
with the pulse point on the thumb side of the wrist.
The open end of the Cotton Sleeve will point down
toward the elbow. Press the sleeve to the Wrist Strap
to firmly adhere the sleeve in place.
10. Place the other Cotton Sleeve, again with the open
side towards the elbow, in line with the pulse point
on the little finger side of the wrist. This pulse point is usually harder to feel. It is
located in the soft hollow on the wrist, in line with the little finger. Press the sleeve
to the Wrist Strap to firmly adhere the sleeve in place. See image 7.
4
6
5
