Instructions for the SOTA Magnetic Pulser, Model MP5
• The SOTA units are consumer products designed to be used as part of a Wellness Lifestyle • The SOTA units are not medical devices nor
are they intended to diagnose, treat or cure any medical or health condition • The use, safety or effectiveness of the SOTA units, has not
been approved by any government agency • Please consult a health practitioner for any medical or health condition. • Results using the SOTA
Products will vary for each person. • Please note that all purchases of SOTA Products are deemed to be made in Penticton, BC, Canada •
© 2010 SOTA Instruments Inc.
Page 4 of 7
www.sota.com
5. While this technology is generally considered safe, there exists potential for rare
individual reactions that cannot reasonably be foreseen. Therefore, your use of
the SOTA Products constitutes your agreement that you are responsible for your
decision to use the technology.
SUMMARY OF LIGHTS:
GREEN: Indicates the unit is on and the pulse is building.
RED: Indicates the pulse is being released.
YELLOW: Indicates the Sound option is on.
HOW TO USE THE MAGNETIC PULSER
1. Insert the power plug from the AC-DC wall adaptor into the
unit and plug the adaptor into an electrical outlet.
2.
Push the ON/OFF button. All the lights will flash in
sequence to indicate the unit is ready for use.
The
green
lights indicate the pulse is building. The
red
light will flash each time the Pulsed Magnetic Field is
released from the Hand Paddle. A click may or may not
be heard as the pulse is released.
3.
Sound option: To hear a beep each time the pulsed field is
released, push the SOUND button. The yellow light will
indicate the audio option is ON.
4. The head of the Hand Paddle should be located on or as close to the body as
possible. It does not need to touch the body. Clothing will not interfere with the
magnetic field.
Note: The Pulsed Magnetic Field penetrates up
to nine inches.
5. For most applications, use the side of the
Hand Paddle marked Bio-North (-) against the
body.
6.
When a cycle finishes (approx. 20 - 30
minutes) the unit will beep. To continue with
another cycle, push the ON/OFF button
