background image

Made in China. Designed and Engineered in Canada.

• The SOTA units are consumer products designed to be used as part of a Wellness Lifestyle • The SOTA units are not medical devices nor are they 

intended to diagnose, treat or cure any medical or health condition • The use, safety or effectiveness of the SOTA units has not been approved by any 

government agency • Please consult a health practitioner for any medical or health condition • Results using the SOTA Products will vary for each 

person • Please note that all purchases of SOTA Products are deemed to be made in Penticton, BC, Canada •

© 2007-2017 SOTA Instruments Inc. 

Page 8 of 8 

|

 www.sota.com

The LightWorks Model LW1 Manual

TROUBLESHOOTING

A Troubleshooting Guide for the LightWorks is available at  

www.sota.com/manuals

. This Guide is a great tool to check if you are experiencing 

any issues with your unit. 

COUNTRIES THAT PARTICIPATE IN MANUFACTURING

The manufacturing of the SOTA Products is a global collaboration. The following 

countries participate in the making of the LightWorks (listed in alphabetical order): 

Canada, China and Hong Kong

.

REPLACEMENT ACCESSORIES

To replace your accessories, contact your supplier.

WARRANTY

The LightWorks is covered by a three (3) year limited warranty. Please keep proof of 

purchase. Warranty is void if the failure is due to abuse or negligence. SOTA reserves 

the right to make changes to the LightWorks without obligation. 

REPAIRS 

Please contact your supplier for return instructions. Or, for information about your 

closest repair depot, contact [email protected] or

Toll-Free: 1.800.224.0242 (Canada & USA)   Tel: 1.250.770.2023   

Summary of Contents for LightWorks LW1









Reviews: