©
2007
-2017 SOTA Instruments Inc.
Page 5 of 8
|
www.sota.com
The LightWorks Model LW1 Manual
8.
When any of the timed cycles finish, the unit will beep. To continue with another
cycle, push the ON/OFF/MODE button within 20 seconds of the beep. The unit
turns itself off if the ON/OFF/MODE button is not pushed within this time.
9. To turn the unit off before the end of a cycle, hold the ON/OFF/MODE button down
for a full two seconds.
10.
Unplug the Wall Adaptor
when not in use.
Note: With the unit off, when unplugging the Wall Adaptor or the LightWorks Cord,
the lights on the Hand Paddle may flash briefly—this is normal.
Notes:
Hand Paddle:
The Hand Paddle can be changed from side to side at any time during
a timed session.
The Hand Paddle casing for the LED lights may become very warm with extended
use. If it feels uncomfortable, turn it off and allow it to cool before continuing.
Timing:
When either the Mode or Hand Paddle setting is changed the timing is reset.
Cleaning the Hand Paddle Lenses:
Use a damp cloth. Do not spray water directly
on the Hand Paddle as this risks moisture entering the casing. Do not use abrasive
chemicals on the plastic.
HOW IT SHOULD FEEL
Most individuals will not feel any sensation while using the LightWorks.
TYPICAL USE
Length of Session:
It is best to begin slowly and then gradually increase the length
of each session. Daily use varies from 4 to 32 minutes or more.
Length of Use:
When used as part of a Wellness Protocol, use every other day.
For specific purposes, longer and more frequent sessions may be more beneficial.
Generally, the LightWorks can be used as needed.
Placement:
The Hand Paddle may be kept on one location or it may be moved at any
time to different locations.
Drink plenty of water
: It’s important to drink enough water when using the unit.
Drinking ozonated water is especially helpful.
