©
2007
-2017 SOTA Instruments Inc.
Page 4 of 8
|
www.sota.com
The LightWorks Model LW1 Manual
SUMMARY OF LIGHTS
GREEN: Indicates which mode is selected.
ORANGE: Indicates that the Automatic Option is in operation.
HOW TO USE THE LIGHTWORKS
1. Insert the power plug from the AC-DC Wall Adaptor into the unit and plug the
adaptor into an electrical outlet.
2. Remove the protective cover from the lens on both sides of the Hand Paddle.
3. Plug one end of the LightWorks Cord into the Hand
Paddle and the other end into the Base. When
properly inserted, the plugs will click securely into
the jacks.
4. Push the ON/OFF/MODE button. All the lights on
the base will flash in sequence to indicate the unit
is ready for use. The unit starts in the Automatic
(AUTO) Option and begins with the Constant
Mode. The AUTO light will flash continuously.
5. Select one side of the Hand Paddle by pushing the
Hand Paddle button. Only one side of the Hand
Paddle is operational at a time. Push the Hand Paddle button to check the operation
of each side of the Hand Paddle.
6.
The unit can be left in AUTO or a specific Mode can be selected.
a. In AUTO, the unit will operate on the selected side of the Hand Paddle for 32
minutes—4 minutes on each of the 8 Modes. The unit sounds a ‘beep’ after each 4
minute Mode has completed.
b.
Manual Option: Choose a specific Mode by pushing the ON/OFF/MODE button
briefly. A
GREEN light indicates which mode is selected. The Constant Mode
operates for 30 minutes and Modes A - G run for 15 minutes each.
c. To return to the AUTO Option continue pressing the ON/OFF/MODE button
until the ORANGE light comes on. See ‘Output of Modes’ on page 6 for the
frequency of each Mode.
7. The LED lights on the Hand Paddle should be placed on or very close to the skin.
Clothing will block the light.
