Loop
SORG
14
2.3.2 Displacing the seat plate horizontally
In order to displace the seat plate by 2 cm with the same
tilting direction (only possible with frame sizes 2 and 3):
• (1)
remove the screws
(A)
from the seat plate
(B)
on both sides including the inner shells (see chap-
ter 2.2.2, picture 2E) completely.
• (2)
Remove the screws
(F and D)
from the gas
spring
(E)
completely,
• move the seat plate
(1B)
to the alternative posi-
tion,
• replace the shells,
• replace the screws
(1A)
through the shell
• and retighten the screw connections
(1A)
.
• Place the gas spring
(2E)
in the alternative posi-
tion
(2F and 2D)
,
• replace the screw
• and tighten it.
ATTENTION
AFTER EVERY CHANGE MADE ON THE SEAT AND/OR THE
TILTING, THE TILT BEHAVIOR OF THE LOOP MUST BE NEW-
LY TESTED AND PRACTICED WITH A PASSENGER AND THE
HELP OF AN EXPERIENCED AND STRONG PERSON.
�
INDICATION
If the Loop is equipped with two gas springs then please
precede the same.
2.3.3 Displacing the seat plate vertically
In order to displace the seat plate by 2 cm with the same
tilting direction:
• (3)
loosen both screws
(C)
from the guide clip on
both sides and
• remove both screws from the screw connection
(A)
of the seat unit including the half shells
(B)
on
both sides completely.
• (4)
Remove the screw connections of the gas
spring
(F)
including the shells completely.
• (3)
Move the seat unit with the carriers
(D)
to the
desired measurements in the holes
(E)
(each hole
is ± 2 cm),
• (4)
Displace the gas spring in the holes
(G)
(each
hole is ± 2 cm) in the same measurement.
• Place the screws
(3A)
with the half shells
(3B)
in
the new position and tighten them firmly.
• Place the screws
(4F)
with the shells in the con-
nection of the gas spring and tighten them firmly.
ATTENTION
AFTER EVERY CHANGE MADE ON THE SEAT AND/OR THE
TILTING, THE TILT BEHAVIOR OF THE LOOP MUST BE NEW-
LY TESTED AND PRACTICED WITH A PASSENGER AND THE
HELP OF AN EXPERIENCED AND STRONG PERSON.
ATTENTION
If you do not displace the seat unit and the gas spring
parallel, a different tilting direction and a different seat
adjustment will result.
(1)
(2)
(3)
(4)
(A)
(D)
(F)
(E)
(A)
(C)
(D)
(E)
(B)
(G)
(F)
(B)
(C)
