service record
11
(A) (B)
(C)
(D)
(E)
(F)
(G)
(A)
(E)
(F)
(G)
(H)
(B)
2.2
ASSEMBLY GROUP FRAME
2.2.1 Frame arch for closed frames
In order to add the frame arch for a closed frame in the
front, proceed on both sides of the frame in the same man-
ner as follows:
• (1)
Remove the caster adapters on both sides
(3A)
including the half shells
(3B) as described in 2.1.9,
if necessary,
• remove the knee lever brakes (see chapter
“brakes”)
• and remove the caps on the end of the frame pipes
(A)
and
(B)
.
• (2)
Guide the delivered shell
(C)
from the front in
the frame pipe and screw it on with the screw
(D)
in the suitable hole
(E)
.
• Place the frame arch on the mounted shell
(C)
and
at the same time, guide the tappet
(F)
in the bot-
tom frame pipe.
• Screw the frame arch together at the top with the
screw
(G)
in the shell
(C)
.
• Check the tight fit of the screws
(D and G)
.
• (3)
Displace the caster adapters
(A)
and the half
shells
(B) as described in 2.1.9
out of the old
holes
(E+F)
and in the new holes
(F+G)
,
• Mount the adapter
(A)
including the half shell
(B)
in the new position
(F+G)
with the screws
(H)
• and adjust the caster
as described in 2.1.8
in an
absolute vertical position.
• If necessary, you have to remount and readjust the
knee lever brakes (see chapter “brakes”).
ATTENTION
THE CASTERS MUST BE MOUNTED IN THE NEW POSITION
SINCE THE FRAME ARCH IS ATTACHED TO THE FRAME
WITH THE SCREWS (H) FOR THE CASTER ADAPTERS.
(1)
(2)
(3)
