Instructions of use Dynamis TSD
13 of 36
2021-05-26
(2)
After insertion,the locking ball
(A)
must protrude visibly. Ziehen Pull at least 1x after
each insertion to test whether the quick-release axle is engaged. It should no longer be possi-
ble to pull the wheels outwards.
3.1 Handling of wheels
(1)
(2)
(2)
(A)
1.
1.
(1)
(1)
Hand rim covers can stretch in the heat and loosen from the hand rim.
3.1.2 Tire pressure
3.1.1 General information on wheels
Braking the wheels on the hand rims creates frictional heat.
You will find the appropriate operating pressu
-
re on the tire - usually 3-10 bar.
(1)
If you have a flat tire, please contact your
specialist retailer.
3.1.3 quick release wheels
Remove:
Install:
