SAFETY INSTRUCTIONS
EG-Conformity
By affixing the CE mark to the unit the manufacturer declares that °CALEON Thermostat conforms to the following relevant safety regulations:
l
EU low voltage directive 2014/35/EU
l
EU electromagnetic compatibility directive 2014/30/EU
conforms. Conformity has been verified and the corresponding documentation and the EU declaration of conformity are kept on file by the man-
ufacturer.
General instructions
Please read carefully!
These installation and operating instructions contain basic instructions and important information regarding safety, installation, commissioning,
maintenance and the optimal use of the unit. Therefore these instructions must be read and understood completely by the installation
technician/specialist and by the system user before installation, commissioning and operation of the unit.
This unit is an automatic, electrical °CALEON Roomthermostat. Install the device only in dry rooms and under environmental conditions as described
under "Technical Data".
In addition, observe the applicable accident prevention regulations, the regulations of the Association of Electrical Engineering, the local power sup-
ply utility, the applicable DIN-EN standards and the installation and operating instructions for the additional system components. Installation, elec-
trical connection, commissioning and maintenance of the unit may only be carried out by specialists who possess the appropriate training.
Users: Make sure that the specialist gives you detailed information on the function and operation of the unit. Always keep these
instructions in the vicinity of the unit.
The manufacturer does not take over any liability for damage caused through improper usage or non-compliance of this manual!
Changes to the Unit
l
Changes, additions to or conversion of the unit are not permitted without written permission from the manufacturer.
l
It is likewise forbidden to install additional components that have not been tested together with the unit.
l
If it becomes clear that safe operation of the unit is no longer possible, for example because of damage to the housing, turn the
Unit off immediately.
l
Any parts of the unit or accessories that are not in perfect condition must be exchanged immediately.
l
Use only original spare parts and accessories from the manufacturer.
l
Markings made on the unit at the factory must not be altered, removed or made illegible.
l
Only the settings described in these instructions may be set using the Unit.
Changes to the unit can compromise the safety and function of the unit or the entire system.
Warranty and Liability
The Unit has been manufactured and tested with regard to high quality and safety requirements. The warranty and liability shall not include, how-
ever, any injury to persons or material damage that is attributable to one or more of the following causes:
l
Failure to observe these installation and operating instructions.
l
Improper installation, commissioning, maintenance and operation.
l
Improperly executed repairs.
l
Unauthorized structural changes to the unit.
l
Use of the device for other than its intended purpose.
l
Operation above or below the limit values listed in the ‚Specifications‘ section.
l
Force majeure.
Disposal and Pollutants
The unit conforms to the European RoHS 2011/65/EU for the restriction of the use of certain hazardous substances in electrical and electronic equip-
ment.
Under no circumstances may the device be disposed of with the normal household waste. Dispose of the unit only at appro-
priate collection points or ship it back to the seller or manufacturer.
3
