Operating Instructions
(Slide-In)
Installing or Removing Battery Pack
(See Fig.1 Fig.2)
1. Always switch off the machine before insertion or
removal of the battery pack.
2. To remove the battery pack, push the button on the
battery pack and pull the tool unit from the battery pack
in the direction.
3. To insert the battery pack, align the tool unit slides with
the battery pack sliding groove and push the tool unit
into place.
The tool unit can be slide into battery pack in two
directions.
4. Do not force the battery pack in sliding it into tool unit. If
the battery pack does not slide in easily, it is not being
inserted correctly.
Charging the Battery Pack (See Fig.3)
1. Plug the fast charger into the power source.
2. Slide the battery pack into the charger as the arrow
direction shown on the charger.
3. Push the battery pack into place and make sure the red
light on the charger is “ON”. The battery pack is now
starting the charging cycle.
4. After finish the charging cycle, the light will turn into
green. The battery pack is now ready for use.
5. Your new battery pack is not charged. You need to
charge it before use.
6. Always use the specified charger to charge the
battery. When the battery pack is inserted into the
charger correctly, the red light will come on and
charging will begin.
7. When you charge a new battery pack or a battery pack
which has not been used for a long period, it may not
accept a full charge. This is a normal condition and
does not indicate a problem. You can recharge the
battery pack fully after discharging it completely a
couple of times.
8. Unplug the charger from the power source after finish
the charge.
9. Please remove the battery from the unplugged charger
for storage.
Fig.1
Fig.2
1
2
1
Fig.3
