Tool Operation
1. Open the lid of the epoxy cartridge.
2. Screw the mixer tip to the epoxy cartridge.
3. Pull the Rear knob to extend rack, and put the cartridge into the epoxy gun.
4. Push the rear knob to have the disk slightly contact with cartridge to start
operating the epoxy gun.
5. Put one arm through the strap and hold the handle with your hand. Use the
other hand to hold the fixture.
6. Push main switch to start the epoxy gun.
7. The rack will retract slightly when you release the main switch in order to
prevent dripping, so allow a few seconds for the rack to move forward when you
press the main switch to operate.
8. The main switch located above the handle can be used to control speed.
Main Switch
