△
! WARNING
Operational Precautions
General Safety Instructions
1. Consider work area environment. Do not expose tools to rain. Do not use
tools in damp or wet locations
：
Keep work area clean and well lit. Do not use
tools in the present of flammable liquids or gases.
2. Guard against electric shock. Avoid body contact with earthed or grounded
surfaces.
3. Keep children away. Do not let visitors touch the tools or extension cord. All
visitors should be kept away from work area.
4. Store idle tools. When not in use, tool should be stored in a dry locked up
place, out of reach of children.
5. Do not force the tool. It will do the job better and safer at the rate for which it
was intended.
6. Stay alert. Watch out what you are doing
：
Use common sense. Do not operate
tool when you are tired. Check damaged parts. Before further use of the tool,
a guard or other part is damaged should be carefully checked to determine
that it will operate properly and perform its intended function.
7. Check for alignment of moving parts, blinding of moving parts, breakage of
parts, mounting and any other condition that may affect its operation.
8. A guard or other parts that is damaged should be properly repaired or
replaced by an authorized service center unless otherwise indicated in this
instruction manual. Have defective switches replaced by an authorized
service center. Do not use tool if switch does not turn it on.
9. To ensure the designed operational integrity of power tools, do not remove
installed cover or screws.
10. Use your tool at lower input than specified on the nameplate, otherwise, the
finish may be spoiled and working efficiency reduced by motor overload.
11. Do not wipe plastic parts with solvent. Solvents such as gasoline, thinner,
benzene, carbon tetrachloride, alcohol, ammonia and oil containing chloric
annex may damage and crack plastic parts. Do not wipe them with such
solvent. Wipe plastic parts with a soft cloth lightly dampened with soap water.
12. Dress properly. Do not wear loose clothing or jewelry. Contain long hair keep
your hair, clothing, and gloves away from moving parts.
13. Use safety equipment. Always wear eye protection, non-skid safety shoes,
hard hat, or hearing protection.
14. Do not overreach. Proper footing and balance enables better control of the
tool in unexpected situations.
