10
XGS 5500/6500
Operating Instructions
Putting into Operation
Scope of Supply
The supplied parts are indicated in the Hardware Quick Start Guide.
Mounting Instructions
The XGS 5500/6500 appliances are designed for use in racks. Please consider the
following security tips:
Important note:
Functional reliability outside of a rack cannot be guaranteed.
Warnings and Precautions
The appliance can be operated safely if you observe the following notes and the notes on
the appliance itself.
Rack Precautions
Ì
Ensure that the leveling jacks on the bottom of the rack are fully extended
to the floor with the full weight of the rack resting on them.
Ì
In single rack installation, stabilizers should be attached to the rack.
Ì
In multiple rack installations, the racks should be coupled together.
Ì
Always make sure the rack is stable before extending a component from the rack.
Ì
You should extend only one component at a time—extending two or
more simultaneously may cause the rack to become unstable.
General Server Precautions
Ì
Installation must be performed by qualified personnel
Ì
Review the electrical and general safety precautions that came
with the components you are adding to your appliance.
Ì
Determine the placement of each component in the rack before you install the rails.
Ì
Install the heaviest server components on the bottom of the rack first, and then work up.
Ì
Allow the hot plug power supply modules to cool before touching them.
Ì
Always keep the rack‘s front door, all panels and server components
closed when not servicing to maintain proper cooling.
