(3) In running state: Pressing “start/stop” , then the treadmill will stop slowly and
back to standby state.
2.2 “+”“-”button is to adjust speed. Keep pressing “+”/“-” over 0.5 seconds, the speed
will keep increasing or decreasing. Note: The speed will change by 0.1mph.
2.3 “M”:
①
In standby mode: it can switch from different mode, including Time,
Distance and Calories.
②
In running mode: press ”M” button will switch display
mode between cyclic display mode and single display mode.
2.4 “P”: There are P01~P12, totally 12 preset programs you can choose in standby
mode.
2.5 Press the “
” once to mute the machine, and press it again to resume the
beep sound.
2.6 After use, press "
" button, treadmill will stop slowly and it will retain its
data until power off.It will resume the previous speed when start again.
"Reset": Press the "
" button, the data will reset. It only works when
treadmill is in standby mode.
(3) Functional Instruction
3.1 Sports mode: Press “start” key to start the machine and the SPEED window will
count from“3 2 1 ”. Please note that the default speed is 0.5MPH and you can
press“+”“-” to adjust speed.
3.2 Countdown mode: when in standby, press“M” key to choose countdown for time,
distance and calories. Press “+”“-” to set relevant data. After setting, press“start/stop”
to start the treadmill, it will count down from the set data, the machine will stop by
itself when it counts to 0.
3.3 Preset program(P01~P12): choose one program first and then press “+”“-” to set the
running time(ranges 5:00~99:00, and the default time is 30:00), press “start/stop” to
start the machine, it will run according to the preset speed and speed will change
according to the time ”(Time/20)”.
