1.2
“DISTANCE”window
has two modes which shows the current movement
distance.
①
In the forward counting mode, the distance will be increased from0.0
to 99.9 miles, it will recount if the distance reaches the top point.
②
In the distance
countdown mode, the distance will be decreased from the setting data(setting
range:1.00~99.00miles) to 0 . The machine will stop slowly when it counts to 0:00
and shows” end”, then the machine will come to the standby mode after 5
seconds.
“CALORIES”window
has two modes which shows the calories.
①
Forward mode
counts from 0 to 9999, it will recount when it reaches the top point.
②
countdown
mode will count from setting calorie data( setting ranges 20~990) to 0. The
machine will stop slowly when it counts to 0:00 and shows” end”, then the
machine will come to the standby mode after 5 seconds.
Note: The window will be switched from DISTANCE and CALORIES
cyclically, you can press“ M” button to switch between cyclic display mode
and single display mode in motion state.
1.3
“SPEED” window
shows the current running speed, the setting range is
0.5MPH~6.0MPH. The speed will +/- 0.1MPH every time you click “+/-” button.
P1 ~ P12 are displayed under the setting of automatic selection.
1.4 After the treadmill is started, every window will be displayed cyclically at an
interval of 5 seconds. You can press the "M" button to switch between cyclic
display mode and single display mode.
(2) Function Of The Remote Control
2.1
“Start/Stop”:
(1) In standby or countdown mode: Pressing “start/stop” button to start the machine.
Note: The default speed is 0.5MPH/H.
(2) Choose the preset program: Pressing “start/stop” to start the machine and the
speed will changes according to the preset speed.
